Vapor Clean Pro6 Duo - 327° Continuous Refill - 87 Psi ( 6 bar ) Stainless Steel - Made in Italy Pro6 Duo

Our Pro6 has evolved into an extremely functional, reliable and highly rated machine by our customers in Business and Home alike. Our intentional design over years of improving anything we could find to create the finest built with the highest reliability that cannot be found in this class and most others in the Marketplace. Our Pro6 Duo is designed for our harsh condition extended use customers in the field and for the homeowner that wants the best available.

Our Pro6 has evolved into an extremely functional, reliable and highly rated machine by our customers in business and home alike. Our intentional design affords the Pro6 a fast heat while providing a well maintained pressure. The powerful 1750 watt element allows for faster heating and quick recovery. The Pro6 reservoir holds 2 additional quarts for long time running before adding additional water into the reservoir. Our Pro6 is a convenience and a luxury for the homeowner, but a necessity for the business owner. Our full service warranty includes 1 year defective Parts & Labor and lifetime boiler and heating element replacement. All service is provided by Vapor Clean.

Accessories Included

• Heavy Duty Hose
• Extension Wands
• Floor Brush
• Large Triangle Brush
• 10 Mixed Detail Brushes
• Extended Nozzle
• Single Hole Nozzle
• 3 Hole Nozzle
• Window Squeegie
• Med Round Brush
• Triangle Brush
• Carpet Glider
• Microfiber Towels
• Fill Bottle
• Scrubs
• 1000 Thread Towel

Start Up Guide

1.  Remove the pop off black cap from the reservoir and fill to the top with filtered water or high quality tap water. Do not use distilled unless mixed with tap water at a minimum ratio of 20% tap/80% distilled.

2. Push down both power & steam buttons that will light orange/red. The pump will begin to pump and both the yellow low water and green lights will flash, the orange light will stop flashing, the green light will continue to flash. You may need to add water more than once. The gauge will rise to approx. 6 bar and the heating light will go solid.

3.  During this time you may attach your hose and confirm it is locked in place.

4. When the gauge has stopped and the steam ready light is solid pull the trigger on the hose and begin releasing air from the boiler. The first release will cause the gauge to drop quickly to approximately 2 bar. This has now released a large portion of air from the boiler.

Allow the gauge to rise again to the 6 bar range and the ready light is solid – pull the steam trigger and release. This time it should only drop to 3-4 Bar and repeat this action typically one more time.

You are now ready to steam, your boiler is full and will stay that way unless you empty it for maintenance. Refill anytime your refill light illuminates and the beeper notifies you. Your steam ready light will always go solid while heated and sitting idle, and will flash when you are using the machine as this indicates the boiler is heating as you are steaming.

Remember, the lower the steam pressure, the higher the consistent temperature and the drier the steam and your pressure will stay more consistent

Pressure is great for down and dirty cleaning, but for everything else....turn it down! More condensation will occur at a higher pressure output and quicker unnecessary added pressure loss....so once again, keep it down and let the heat do the cleaning

Resources

Manual

About Vapor Clean

Vapor Clean was born 24 years ago, by chance from a simple idea: grout cleaning. Kathy ran across an ad for a home demonstration that used steam to clean grout. After years of using a toothbrush on her hands and knees, she scheduled an appointment and was blown away by how effective using super-heated water vapor to clean the grout was. She began researching and discovered that although steam cleaning was huge in Italy, it was basically unheard of in the States. Kathy saw the potential for growing a business well beyond just a cleaning service. The uses for steam, both residential and commercially, were virtually limitless. She was determined to bring this technology to the American market and at an affordable price to the consumer unlike the expensive few on the market at the time.

In the mid-90s Italy was the sole source for steam cleaners, so the task was no easy one. She spent a couple of years selling other importers machines while working towards her goal. A singlemom at the time, she spent what little remained in her savings account to buy a plane ticket to Italy. But it was money well spent. She returned to the States with a successful agreement with an Italian rep and manufacturer and Vapor Clean was finally launched.

We exclusively offer all of our Dry Vapor Steam Cleaners from our manufacturers in Italy to our main distribution center and steam cleaner distributors in the US and Canada. Through confidence and strong relationships built over time, we now offer the finest and only line of the highest quality dry steam cleaners on the market in the US today. We are proud to offer the only product line that offers the versatility and exclusive designs available only from the Vapor Clean line of steam cleaners. We are enthusiasts and experts in the field and thrilled to be part of it!

Shipping

ORDER CONFIRMATION